CONSUMABLES 210222

ServiceCentre EasyNavigationConcept TheLabModularSystem LAB CONSUMABLES

2 CONSUMABLES 5.0 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX 5.1 Supra Nylon Cords and Lens Washers • Supra Nylon Cords ..................................................... 4 • Plastic Strip for Supra Frames assembly............. 5 • Lens and Flex sides Washers .................................. 5 5.2 Glues and Thread Lock • Thread Lock .................................................................. 6 • Cyanoacrylate Glues for Frames ........................... 7 • Cyanoacrylate Glues for Lenses............................. 8 • UV Glue for Rimless Lenses ..................................... 9 • UV Lamp ........................................................................ 9 5.3 Detergents - Marker pens for Lenses • Detergents for Ultrasonic Cleaners ...................... 10 • Lens and Frame Cleaners - SprayClean .............. 11 • Ink remover................................................................... 12 • Marker pens ................................................................. 13 • Ink for Lensmeters ....................................................... 13 5.4 Blocking Pads - Accessories for Glazing • Ripped Blocks and Lens Clamp Adaptor ........... 14 • Discs for lens protection ......................................... 15 • Discs for hydrophobic treatments ....................... 15 • Blocking Pads .............................................................. 16 • Formers, Scissor, No Foam ...................................... 21 • Cleaning and dressing diamond sticks .............. 21

3 5.0 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES 5.5 Pens to colour Lenses and to touch-up Frames • Water Lens Make Up ................................................. 22 • Water Frame Make Up .............................................. 23 • Touch-Up Brushes ...................................................... 24 5.6 PolishingWheels and Compounds • Polishing Compounds .............................................. 25 • PolishingWheels and compounds for Frames .. 26 • PolishingWheels and compounds for Lenses ... 28 5.7 Dyes for Lenses - Neutralizers • Water-soluble Dyeing Powders for CR39-High Index-Polycarbonate ...................... 30 • BPI Liquid Dyes for CR39 ......................................... 32 • Clear Lenses for Tinting ............................................ 33 • Neutralizer Solutions................................................. 34 • Special Liquid for Tinting ......................................... 35 5.8 Soldering Consumables • Solder Rods................................................................... 36 • Solder Wire and Borax .............................................. 36 • Isoflam ............................................................................ 36 • Gas and Oxigen for Miniflam ................................. 37 • Caustic Solution and Boric Acid ................................. 37 • Plating Consumables ................................................ 37 • Soldering Steps ........................................................... 38

For supra frames assembly 4 SUPRA NYLON CORDS AND PLASTIC STRIP 5.1 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX 0,45 0,55 CLEAR SUPRA NYLON CORDS Ref. 01242 For metal frames 4 m 2 m Nylon Holding Plier 03465N to pull the nylon liner Mounting Hook Ref. 03480 to insert the liner into the groove of the lens Nylon Press-in Plier Ref. 03470N to press in the figure “8” liner Ref. 01870 SUPRA KIT • Supra nylon cord Ø 0,5 mm clear Ref. 01235 • “Figure 8” Supra Liner clear. Ref. 01242 • “Figure T” Supra Liner clear. Ref. 01244 • Nylon Holding Plier Ref. 03465N • Nylon Press-in Plier Ref. 03470N • Mounting Hook Ref. 03480 Tray included, suitable for new LMS Cube. Plastic strip Ref. 01249 to insert the liner into the groove of the lens Ref. 01232 Ø 0,4 mm Ref. 01235 Ø 0,5 mm Ref. 01233 Ø 0,6 mm Ref. 01234 Ø 1,0 mm For metal and plastic frames 0,80 2,15 Ref. 01244 For metal and plastic frames Ref. 01249 Non-slip material L = 70x5 mm PLASTIC STRIP FOR SUPRA FRAMES ASSEMBLY 50 pcs. 5 m ROUND FIGURE “8” FIGURE “T” SILICONE GASKET FOR AIR-RIM 20 pcs. ROUND Ø 26,5 mm Ref. 01263 Clear 0,5

NEW In nylon, acetate, silicone, adhesive and rubber 5 LENS AND FLEX SIDES WASHERS 5.1 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES FLEXIBLE NYLON LENS WASHERS REGULAR Ref. 01250 MEDIUM Ref. 01254 LARGE Ref. 01251 SEMI-RIGID ACETATE LENS WASHERS MEDIUM Ref. 01260 THIN Ref. 01266 Dip in acetone to soften and fix into plastic frame groove 4 m ULTRA-THIN Ref. 01255 LARGE Ref. 01256 0,20 mm 1.4 mm 0,25 mm 1.8 mm 0,22 mm 1.6 mm 0,25 mm 1.2 mm 3 m 4,5 m 4 m 0,30 mm 1.6 mm 0,23 mm 1.8 mm Ref. 01872 LENS WASHER KIT Ref. 01250, 01251, 01254, 01255, 01256, 01266 Tray included, suitable for new LMS Cube. SOFT SILICONE LENS WASHERS • Adjustable with heat. • In easy to use dispenser. • Dip in acetone to soften and fix into plastic frame groove. • Prevents rotation of the astigmatism axis. • Sticks the lens to the groove. • Ideal for thick toric lenses. • Easy to apply. 16 m DOUBLE SIDE ADHESIVE LENS INTERLINER Ref. 01267 20 pcs. Rubber ring decreases the gap between the Acetate Flex side and Front Part. Ø 2,6 mm RUBBER INSERT FOR ACETATE FLEX SIDE Ref. 01268 20 pcs. Ø 4,5 mm 0,50 mm 1.8 mm Ref. 01269 20 pcs. Ø 6,0 mm

To block and seal screws and nuts 6 THREAD LOCK 5.2 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX Ref. 01438 ergo® 4052 10 g  3 h Ref.01439 ergo® 4301 10 g  3 h MEDIUM STRENGTH OIL TOLERANT HIGH STRENGTH LOW VISCOSITY Ref. 01431 LOCTITE 243 10 ml  2 h Ref. 01430 LOCTITE 243 50 ml BLUE GREEN All Ergo bottles come with Patented "NoWaste" Dispenser • "Drop by drop" release for precise application • "Anti-desiccation" system: After use, remove glue from nozzle to avoid obstruction. The nozzle does not spill and the glue does not dry out, allowing the complete contents of the bottle to be used up. + + ergo® Made in Switzerland Ref. 01401 Dispensing needle 4 pcs. Ref. 01403 Dispensing needle 4 pcs. Ø 0,26 mm Ø 0,41 mm +

NEW NEW Cyanoacrylate adhesives - Mineral filler 7 ADHESIVES FOR FRAMES 5.2 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES Ref. 01405 LOCTITE 401 Instant superglue - 5 g  1”÷ 45” Complete hardening after 24 hours, for best chemical and mechanical resistance. ACETATE GRILAMID OPTYL RUBBER - NEOPRENE UNIVERSAL FOR PLASTIC - RUBBER METAL LEATHER Ref. 01422 ergo® 5012 Instant superglue - 5 g  2”÷ 30” Ref. 01423 ergo® 5300 Instant superglue - 20 g  2”÷ 30” + + A selection of adhesives and thread locks for the most common applications, for emergency repairs until the replacement frame is ready. Job tray included suitable for the new LMS Cube. Ref. 01874 Composed of: FIRST AID THREAD LOCK Ref. 01439 ADHESIVES FOR FRAMES Ref. 01422 Ref. 01423 ADHESIVES FOR LENSES Ref. 01426 Ref. 01415 GLUE REMOVER GEL Ref. 01429 ANAEROBIC GLUE FOR METAL - PLASTIC CERAMIC - WOOD INNOVATIVE FORMULA Ref. 01421 GLUE 21 Anti-halo - 20 g  7”÷ 45” UNIVERSAL FOR PLASTIC - RUBBER METAL LEATHER The glue remains liquid giving more time to position the parts to be joined and hardens only in the absence of air. MINERAL FILLER FOR CYANOACRYLIC GLUES Ref. 01428 ergo® 5000 30 g + SPECIAL FOR GLASSES

Cyanoacrylate adhesives and silicone glue - Glue Remover Gel 8 ADHESIVES FOR LENSES  GLUE REMOVER 5.2 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX Easy application. The cap with dispensing needle allows the glue to keep flowing freely. Ref. 01415 HYPO-TUBE CEMENT Silicone glue - 9 ml  10’ ÷ 12’min. Ref. 01406 Halo-Free LOCTITE 460 Instant superglue - 20 g  2”÷ 40” With dispensing needle CR39 HIGH INDEX Ref. 01426 Halo-Free ergo® 5922 Instant superglue - 20 g  2”÷ 30” Ref. 01427 ergo® 5973 Instant superglue - 20 g  2”÷ 30” Suitable for plastic and metal frames Liquid lens liner suitable for: • Rimless • Bling crystals • Temple tips + + FOR GLASS POLYCARBONATE METAL AND VARIOUS MATERIALS POLYCARBONATE TRIVEX GLUE REMOVER GEL UNIVERSAL FOR CYANOACRYLATE GLUES Ref. 01429 Liquid Gel ergo® 9153 Does not leak - 20 g  60’ ÷ 90’min. +

Transparent gel for filling in rimless drill holes 9 UV GLUE FOR RIMLESS FRAMES 5.2 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES Ref. 01418 UV-FIX Syringe - 3 g  10’ ÷ 12’min. Ref. 01419 UV-FIX With dispensing needle - 10 g  10’ ÷ 12’min. Bottle FOR PLASTIC AND METAL FRAMES OR LENSES Ideal for filling in rimless drill holes, suitable on any kind of material. The transparent gel hardens through UV rays and can be drilled once completely dried. Ref. 05048 • With 4 UV tubes - Power 9W each tube • Automatic switch off after 90 or 120 seconds Ref. 05048.1 UV tube 9W Power supply: 230V ac Power consumption: 36W Dimensions: 220x265x100 mm Inner dimensions: 145x145x53 mm Weight: 1.7 kg The worktop is extendible and the user is protected from the UV rays. The glue hardens only under UV rays in approx. 10-12 minutes. It must completely crystallize before it can be further processed. The crystallization process normally takes 24 hours. The UV lamp reduces the crystallization time to approx. 2 minutes and guarantees perfect transparency. SPARE PART Ref. 01419A Dispensing needle for Ref. 01419 4 pcs. UV lamp for quick crystallization

Concentrated detergents for ultrasonic cleaners 10 LENS AND FRAME CLEANING IN THE LAB 5.3 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX Do not corrode the frames or lenses High cleaning capacity, enhanced by the mechanical effect of the ultrasound ACTIVE LIQUIDWITH ANTIBACTERIAL PROPERTIES Thanks to its active enzymes, this detergent can also be used without ultrasonic cleaner, just with lukewarm water. Its antibacterial properties sanitize the spectacles. Made in italy - 100% NO ALCOHOL Ref. 06859 1 litre bottle concentrated Add one/two cupfuls of detergent to 1 litre of water OPTOCLEAN Cleaning concentrate specifically for ultrasonic cleaners. Made in Germany. Ref. 05491 1 litre bottle concentrated Add one/two cupfuls of detergent to 1 litre of water Ultrasonic cleaners employ high frequency energy that is generated electronically by a transmitter in the unit. The electrical energy is then transformed into sound waves by a device known as a transducer. Ultrasonic cleaners are easy to operate, require no maintenance and are economical to utilise due to the semiconductors technology. They are the ideal equipment for the cleaning of frames and parts.

Spray Clean with antibacterial properties, 0% alcohol 11 LENS AND FRAME CLEANERS 5.3 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES Sanitizing detergent for frames and lenses, suitable for AR coated lenses. Wipe dry with microfiber cloth ANTIBACTERIAL SPRAY CLEAN Ref. 11945 3 bottles of 150 ml each Ref. 11935 Refill - 1 litre bottle MICROFIBRE GLOVES Ref. 10490 White Medium size 1 pair KING SIZE MICROFIBRE 35x40 cm For the practice, the optical workshop and retail gift. Ref. 11992 6 pcs. assorted colours: grey, light brown, green Individually packed. Ref. 11999 3 pcs. assorted colours Suction cup included. INSTRUCTIONS FOR THE USE OF YOUR SPECTACLES CLEANING Use only recommended products and liquid neutral cleaners and wipe dry with a suitable cloth. Use water if you do not have any recommended products. Do not use corrosive agents, neither alcohol or non-specific detergents, unless otherwise indicated.

To remove the marking on progressive lenses 12 INK REMOVER 5.3 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX INK REMOVER PEN INK REMOVER BOTTLES FOR THE PRACTICE AND THE LAB SPRAY Ref. 06976 Bottle 150 ml 3 pcs./pkg. REFILL Ref. 06857 Bottle 1 litre 1 pc. Centro Style marking ink cleaning solution is suitable for all types of lenses, AR coated, teflon® treated, progressive CR39 and PC lenses. Spray onto the lens and wipe with a microfiber cloth. SUPPLYING THE GLASSES TO THE CUSTOMER The presence of the original markings on progressive lenses allows to check the correct position of the optical centres. After this, marks can be easily removed with the Ink Remover Pen (Ref. 06973) or with the Ink Remover Spray (Ref. 06976). FELT PEN Ref. 06973 8 gr 1 pc.

NEW To mark lenses 13 MARKER PENS AND INK 5.3 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES INK FOR LENSMETERS Ref. 06982 Red 30 ml 1 pc. Ref. 06960 Red, fine 0.6 mm 5 pcs. Ref. 06962 Black, fine 0.6 mm 5 pcs. WATERPROOF PERMANENT MARKER PENS FOR NORMAL LENSES SPECIAL MARKERS FOR TEFLON® COATED LENSES / SUPER-HYDROPHOBIC Ref. 06964 Black, extra-fine 0.4 mm 5 pcs. Ref. 06965 Black, fine 0.6 mm 5 pcs. Ref. 06966 Red, fine 0.6 mm 5 pcs. LAQUER FILLED PEN IDEAL FOR SUN LENSES Ref. 06967 White, medium 0.8 mm Prevents light transmission 2 pcs. WATER SOLUBLE NON PERMANENT MARKER Ref. 06970 Black, extra-fine 0.4 mm Ideal to mark Press-On™. 5 pcs. INK FOR CENTERING DEVICES WHITE PENCIL IDEAL FOR SUN LENSES Ref. 06969 3 pcs.

NEW NEW NEW For Automatic Lens Edgers 14 RIPPLED BLOCKS AND LENS CLAMP ADAPTOR 5.4 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX Ref. 07368 Ø 25 mm. Block Ø 16 mm 10 pcs. Ref. 07369 25x20 mm Block Ø 16 mm 10 pcs. Ref. 07375 Ø 25 mm Block Ø 14 mm 5 pcs. Ref. 07376 Ø 18 mm Block Ø 14 mm 5 pcs. Ref. 07371 Ø 25 mm Block Ø 15,5 mm 20 pcs. Ref. 07372 Ø 18 mm Block Ø 15,5 mm 10 pcs. Ref. 03450N Ref. 03452N Ref. 07388 25x17 mm 4 pcs. (2 pairs) Ref. 07378 Ø 22 mm Block Ø 15,5 mm 10 pcs. Ref. 07379 18x14 mm Block 15,5x14 mm 10 pcs. Ref. 07362 25x20 mm Block Ø 16 mm 2 pcs. Ref. 07381 20x15 mm Block Ø 12 mm 5 pcs. Ref. 07377 30x17 mm Block Ø 12 mm For curved lenses - 5 pcs. DE-BLOCKING PLIERS FOR SEMI-RIGID BLOCKS Ref. 07370 Ø 25 mm. Block Ø 16 mm 2 pcs. Flexible Lens Clamp Adaptor for W.B. Ref. 07384 Ø 25 mm 2 pcs. Ref. 07385 Ø 19 mm 2 pcs. Ref. 07367 25x17 mm Block Ø 15 mm 2 pcs. Ref. 07389 20x17 mm 4 pcs. (2 pairs) FOR W./B. HAND EDGERS FOR N. HAND EDGERS FOR E. MR. B./O. HAND EDGERS FOR E.K. ETG. HAND EDGERS FOR H. TZ. HAND EDGERS Ref. 07383 25x20 mm Block Ø 16 mm For curved lenses 10 pcs. Ref. 07382 Ø 25 mm. Block Ø 16 mm For curved lenses 10 pcs. Ref. 07380 30x17 mm Block Ø 12 mm 5 pcs. DE-BLOCKING PLIERS Ref. 03453N Ref. 03455N

Ref. 07333 500 pcs. Clear elliptical 40x26 mm Ref. 07331 500 pcs. Clear elliptical 40x26 mm Ref. 07339 500 pcs. Gold elliptical 40x26 mm Ref. 07335 500 pcs. Clear rectangular 40x18 mm Ref. 07327 100 pcs. Clear 32x17 mm Holes D=2,0 mm Slot 7x3 mm NEW Used in conjunction with blocking pads to prevent lens slippage 15 LENS SURFACE DISKS AND TAPE 5.4 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES FOR LENS CURVES UP TO BASE 6 / +4.5 DPT. For lenses with hydrophobic and super-hydrophobic coating Provides excellent adhesion to hydrophobic and super-hydrophobic lens coatings to prevent lenses from“twisting” and“slipping” off-axis while edging. INSTRUCTIONS FOR USE With common adhesive pads apply one disc to each side of the lens. With hydrophobic and super hydrophobic adhesive pads apply only one disk to the inside of the lens. FOR LENSES WITH HIGHWRAP-AROUND INCLINATION FOR VERY SLIPPERY SUPER-HYDROPHOBIC LENSES FOR RIMLESS FRAME ASSEMBLY BLUE ROUND PROTECTOR DISKS Ø 30 mm Ref. 07330 1000 pcs. Adhesive protector VIDEO

For W and B edgers - 0,4 mm For W and B edgers - 0,4 mm For N edgers - 0,4 mm For E and TP edgers - 0,8 mm For E and TP edgers - 0,4 mm For E and TP edgers - 0,8 mm Thickness 0,4 mm - 3M Quality CR39, High Index, Shatterproof, Glass lenses 16 FOR COATED LENSES 5.4 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX • Excellent torque force resistance • Excellent adhesion • Ideal for standard lenses 20x24 mm Ref. 07359 1000 pcs. Ø 18 mm Ref. 07352 1000 pcs. Ø 24 mm Ref. 07357 1000 pcs. FOR SMALL AND HALF-EYE LENSES FOR SMALL AND HALF-EYE LENSES FOR FULL-EYE LENSES 17x31 mm Ref. 07351 1000 pcs. FOR FULL-EYE LENSES

For W and B edgers - 0,6 mm For W and B edgers - 0,8 mm For N edgers - 0,6 mm For E and TP edgers - 0,8 mm For E and TP edgers - 0,6 mm For E and TP edgers - 0,8 mm Thickness 0,6 mm - 3M Leap™ III CR39, High Index, Shatterproof, Glass lenses 17 FOR COATED LENSES 5.4 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES • Excellent torque force resistance • Excellent adhesion • Ideal for lenses with thin centre (negative powers) FOR SMALL AND HALF-EYE LENSES FOR SMALL AND HALF-EYE LENSES FOR FULL-EYE LENSES FOR FULL-EYE LENSES FOR FULL-EYE LENSES 17x31 mm Ref. 07347 1000 pcs. 24x24 mm Ref. 07345 1000 pcs. 18x24 mm Ref. 07349 1000 pcs. Ø 18 mm Ref. 07348 1000 pcs. Ø 26 mm Ref. 07346 1000 pcs. Ø 24 mm Ref. 07344 2000 pcs.

For N edgers - 0,8 mm For E and TP edgers - 0,8 mm For E and TP edgers - 0,8 mm For E and TP edgers - 0,8 mm For W and B edgers - 0,8 mm For W and B edgers - 0,8 mm Thickness 0,8 mm CR39, High Index, Shatterproof, Glass lenses 18 FOR COATED LENSES 5.4 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX • Very good torque force resistance • Very good adhesion • Excellent quality/price ratio • Ideal for lenses with thin centre (negative powers) 20x24 mm Ref. 07354 1000 pcs. 17x31 mm Ref. 07355 1000 pcs. Ø 24 mm Ref. 07356 1000 pcs. FOR SMALL AND HALF-EYE LENSES FOR SMALL AND HALF-EYE LENSES FOR FULL-EYE LENSES FOR FULL-EYE LENSES Ø 18 mm Ref. 07350 1000 pcs. Ø 22 mm Ref. 07340 1000 pcs. 14x21 mm Ref. 07341 1000 pcs.

For N edgers - 0,8 mm For E and TP edgers - 0,8 mm For E and TP edgers - 0,8 mm For E and TP edgers - 0,8 mm For W and B edgers - 0,8 mm For W and B edgers - 0,8 mm Thickness 0,8 mm - Optisafe® CR39, High Index, Shatterproof, Glass lenses 19 FOR HYDROPHOBIC LENSES 5.4 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES 18x29 mm Ref. 07314 1000 pcs. 17x31 mm Ref. 07315 1000 pcs. Ø 18 mm Ref. 07312 1000 pcs. FOR SMALL AND HALF-EYE LENSES FOR SMALL AND HALF-EYE LENSES PER SAGOME NORMALI PER SAGOME NORMALI Ø 22 mm Ref. 07311 1000 pcs. Ø 24 mm Ref. 07310 1000 pcs. • Excellent torque force resistance • Excellent adhesion • Ideal for standard lenses

ForWand B edgers - 0,9mm For N edgers - 0,9 mm For N edgers - 0,9 mm For E and TP edgers - 0,9 mm For E and TP edgers - 0,9 mm For E and TP edgers - 0,9 mm NEW NEW NEW NEW NEW Thickness 0,9 mm CR39, High Index, Shatterproof, Glass lenses 20 FOR SUPERHYDROPHOBIC LENSES 5.4 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX 20x24 mm Ref. 07294 1000 pcs. 17x31 mm Ref. 07295 1000 pcs. Ø 22 mm Ref. 07291 1000 pcs. Ø 18 mm Ref. 07292 1000 pcs. FOR SMALL AND HALF-EYE LENSES FOR SMALL AND HALF-EYE LENSES FOR FULL-EYE LENSES FOR FULL-EYE LENSES • Excellent torque force resistance • Excellent adhesion • Ideal for lenses with thin centre (negative powers) Ø 24 mm Ref. 07290 1000 pcs. PREMIUM FORMULA The coloured fingerlifts help in correctly positioning the blocking pad: red for the support, yellow for the lens. Support side, adhesive: Acrylic, red fingerlift Lens side, adhesive: Polysiloxane, yellow fingerlift

NEW To be shaped with punch, miller cutter or scissors 21 FORMERS  NO FOAM  SCISSOR  STICKS 5.4 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES Ref. 07400 Trasparent - Shape with punch cutter or scissors. Dim.: 75x60x1.5 mm - 250 pcs. Ref. 03782 Scissor for easy pattern cutting Ref. 06852 A broad spectrum powder defoamer, BPI NO FOAM™ controls foam build up in glass and plastic surfacing and edging operations. Long lasting and readily dispersable, NO FOAM™ is an economical solution to ophthalmic foaming problems. Dilute one bottle into 20 litres of water. 60 gr Cleaning and dressing diamond sticks Ref. 07411 Green - Shape with punch cutter or scissors. Dim.: 70x60x2.0 mm - 250 pcs. Ref. 07421 White - Shape with miller cutter. Dim.: 70x60x2.5 mm - 250 pcs. Ref. 07300 Coarse 120G Dim.: 150x24 mm 6 pcs. Ref. 05127 Fine 280G Dim.: 100x25 mm 5 pcs.

Multicolour edge customising: an exclusive service! 22 WATER MAKE UP LENS 5.5 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX Ref. 07231 Grey col. 5330 LENS MAKE UP is a special felt pen to decorate: • The lens edge of rimless and supra glasses. Suitable for CR39, crystal, polycarbonate and acrylic lenses. • Each pen can colour up to 300-500 lens pairs. • Available in 6 classic colours. Ref. 07232 Black col. 4 Ref. 07233 Dark Brown col. 5340 Ref. 07234 Dark Green col. 5332 Ref. 07235 Bordeaux col. 5333 Ref. 07236 Turquoise col. 5341

Water felt pens to retouch frames - Multicolour metallic paints 23 WATER MAKE UP FRAMES 5.5 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES Ref. 07209 Clear Shiny 001 Ref. 07210 Yellow Gold 003 Ref. 07211 White 7364 Ref. 07201 Gun Metal 016 Ref. 07202 Silver 7370 Ref. 07203 Matt Night Blue 038 Ref. 07204 Genuine Wine 108 Ref. 07205 Antique Brown 009 Ref. 07207 Satin Black 005 Ref. 07208 Shiny Black 004 Ref. 07212 Dark Avana 011 FRAME MAKE UP is a special felt pen to: • Colour frames • Colour screws, pad arms or other parts • Retouch scraped parts • Retouch sweat-eaten temples. MAKE UP FRAME KIT Ref. 07200 Full assortment of 12 pens. Ref. 07206 Shiny Bordeaux 014 INSTRUCTIONS • Clean thoroughly the part to be repaired. • Shake felt pen very well before use. • Press felt and apply colour onto the frame. • Allow to air dry for 15 minutes. • Warm in frame heater to speed up drying.

NEW NEW NEW Ref. 07120 Metallic Gun Metal Ref. 07111 Metallic Gold For customising your frames, contents 12 ml. 24 TOUCHUP BRUSHES 5.5 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX Ref. 07121 Metallic Blue METALLIC CLASSIC Ref. 07110 Metallic Silver Ref. 07109 Blue Ref. 07104 Matt Black Ref. 07106 Brown Ref. 07100 Shiny Black Ref. 07117 White Ref. 07116 Clear Ref. 07112 Fire red INSTRUCTIONS • Shake well before use. • Apply an even layer of lacquer with the cap brush. • Wait a few minutes until it dries. • To obtain tortoise effect, brush again irregularly. Ref. 07118 Set of 12 lacquers. (Ref. 07100 Shiny Black - 2 pcs.) TOUCH-UP BRUSH KIT

For polishing and glossing of metal and plastic 25 POLISHING COMPOUNDS 5.6 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES HARD POLISHING - MATT FINISH FOR ACETATE FRAMES - METAL FRAMES - LENSES Ref. 05280 Sand compound - 300 g For acetate frames Ref. 05285 White compound - 300 g For white metal frames and CR39 lens edges Ref. 05282 White compound - 250 g For acetate frames and glass lens edges Ref. 05286 Green compound - 300 g For white metal frames Ref. 05289 Yellow compound - 250 g For gold metal frames Ref. 05291 Ivory compound - 300 g For polycarbonate lenses. FINE POLISHING AND GLOSSING FOR ACETATE FRAMES - METAL FRAMES - LENSES LENS EDGE POLISHING AND GLOSSING INSTRUCTIONS • Apply polishing compound in a thin even layer to mop. Repeat frequently. • Slightly increase pressure when processing glass lenses. • After polishing wipe off compound residuals with a soft cloth. • Clean frame in ultrasonic bath.

For polishing and glossing metal and plastic frames 26 POLISHING WHEELS AND COMPOUNDS FOR FRAMES 5.6 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX GOLD METAL FRAMES Ref. 05235 Brass wire Ø 90 mm 8 mm Bore Ø 6.5 mm Ref. 05205 Cotton Ø 120 mm 10 mm Bore Ø 8 mm Ref. 05220 Cotton Ø 100 mm 6 mm Tapered bore from Ø 8 a 6.5 mm CLEANING AND DE-SCALING BRUSHES POLISHING MOPS Ref. 01880 SET OF WHEELS AND COMPOUNDS FOR ACETATE FRAMES Wheels: Ref. 05200, 05205, 05225 Compounds: Ref. 05280, 05282. Tray included, suitable for new LMS Cube. Ref. 01882 SET OF WHEELS AND COMPOUNDS FOR WHITE OR GUN METAL FRAMES Wheels: Ref. 05200, 05205, 05225 Compounds: Ref. 05285, 05286. Tray included, suitable for new LMS Cube. Ref. 01884 SET OF WHEELS AND COMPOUNDS FOR GOLD METAL FRAMES Wheels: Ref. 05200, 05205, 05225 Compounds: Ref. 05289. Tray included, suitable for new LMS Cube. ACETATE FRAMES FORWHITE OR GUN METAL FRAMES

Technical advice 27 POLISHING STEPS 5.6 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES 2.800 POLISHING Apply gentle pressure to avoid overheating. Ref. 05205 Ref. 05220 Cotton Ref. 05280 Sand 1.400 2.800 FINE POLISHING Apply gentle pressure to avoid overheating. Use a thin layer of compound frequently. Ref. 05200 Flannel Ref. 05282 White 2.800 Ref. 05225 Soft cotton Ref. 05282 White POLISHING Apply gentle pressure to avoid overheating. Ref. 05205 Ref. 05220 Cotton Ref. 05285 White FINE POLISHING Apply gentle pressure to avoid overheating. Use a thin layer of compound regularly. Ref. 05200 Flannel Ref. 05286 Green GLOSSING Apply gentle pressure to avoid overheating. After glossing always wipe off compound residue with a soft cloth. Clean in ultrasonic bath. Ref. 05225 Soft cotton Ref. 05286 Green HARD POLISHING Apply gentle pressure to avoid overheating. Ref. 05235 Brass wire No compound required POLISHING Apply gentle pressure to avoid overheating. Ref. 05205 Ref. 05220 Cotton Ref. 05289 Yellow FINE POLISHING Apply gentle pressure to avoid overheating. Use a thin layer of compound regularly. Ref. 05200 Flannel Ref. 05289 Yellow GLOSSING Apply gentle pressure to avoid overheating. After glossing always wipe off compound residue with a soft cloth. Clean in ultrasonic bath. Ref. 05225 Soft cotton Ref. 05289 Yellow 1.400 2.800 2.800 1.400 1.400 2.800 2.800 1.400 1.400 rpm Compounds Wheels Ref. 05200 Flannel Ø 120 mm 10 mm Bore Ø 8 mm Ref. 05225 Soft cotton Ø 100 mm 35 mm Tapered bore from Ø 9 to 6.5 mm Reinforced wooden centre GLOSSING MOP FINE POLISHING MOPS GLOSSING Apply gentle pressure to avoid overheating. After glossing always wipe off compound residue with a soft cloth. Clean in ultrasonic bath.

For polishing and glossing CR39, polycarbonate or glass lenses 28 POLISHING WHEELS AND COMPOUNDS FOR LENSES 5.6 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX CR39 LENSES GLASS LENSES CR39 AND POLYCARBONATE LENS POLISHING Ref. 01886 SET OF WHEELS AND COMPOUNDS FOR CR39 AND POLYCARBONATE LENSES Wheels: Ref. 05225, 05226, 05228 Compounds: Ref. 05282, 05285, 05291. Tray included, suitable for new LMS Cube. Ref. 05226 Hard felt for flat edge polishing. Ø 100 mm 20 mm Bore Ø 6 mm Ref. 05228 Hard felt, for bevel and flat edge polishing. Ø 70 mm 20 mm Bore Ø 6 mm POLYCARBONATE LENSES

Technical advice 29 POLISHING STEPS 5.6 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES Ref. 05225 Soft cotton Ø 100 mm 35 mm Tapered bore from Ø 9 to 6.5 mm Reinforced wooden centre rpm FOR COMPACT GLOSSINGWITH COMPOUND GLOSSING Apply gentle pressure to avoid overheating. After glossing, always wipe off compound residue with a cloth. Clean in ultrasonic bath. Ref. 05225 Soft cotton Ref. 05282 White 2.800 1.400 POLISHING Apply gentle pressure to avoid overheating. Use a thin layer of compound. Apply frequently. Ref. 05226 Hard felt Ref. 05285 White 1.400 Ref. 05228 Hard felt with groove Ref. 05285 White GLOSSING Apply gentle pressure to avoid overheating. After glossing, always wipe off compound residue with a cloth. Clean in ultrasonic bath. Ref. 05225 Soft cotton Ref. 05282 White 2.800 1.400 POLISHING Apply gentle pressure to avoid overheating. Use a thin layer of compound. Apply frequently. Ref. 05226 Hard felt Ref. 05291 Ivory 1.400 Ref. 05228 Hard felt with groove Ref. 05291 Ivory 2.800 POLISHING Apply slightly more pressure, keep lens turning. After polishing always wipe off compound residue with a cloth. Clean in ultrasonic bath. Ref. 05226 Hard felt Ref. 05282 White 2.800 Ref. 05228 Hard felt with groove Ref. 05282 White Compounds Wheels

NEW Biodegradable - For CR39 - High index - Polycarbonate - 10 g sachets 30 WATERSOLUBLE DYEING POWDERS 5.7 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX GREY 1 Ref. 06838 BROWN 1 Ref. 06830 BROWN 2 Ref. 06832 BROWN SMOKE Ref. 06833 25%  1÷2’ 50%  5÷7’ 75%  9÷13’ 90%  15÷25’ NOT SUITABLE FOR DRIVING. SIGNAL LIGHT COLOURS ARE NOT ALWAYS DISTINGUISHABLE. GREY 2 Ref. 06840 FC1 FC2 FC3 FC1 FC2 FC3 FC1 FC2 FC3 FC1 FC2 FC3 FC4 FC1 FC2 FC3

NEW NEW NEW Biodegradable - For CR39 - High index - Polycarbonate - 10 g sachets 31 WATERSOLUBLE DYEING POWDERS 5.7 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES BLACK Ref. 06839 GREEN/GREY Ref. 06841 GREEN Ref. 06843 COBALT Ref. 06842 YELLOW Ref. 06844 SUITABLE FOR NIGHT DRIVING PINK Ref. 06845 RED Ref. 06847 75%  9÷13’ 90%  15÷25’ 50%  5÷7’ BLUE Ref. 06849 ORANGE Ref. 06846 MAUVE Ref. 06848 INSTRUCTIONS • Heat 1 litre of demineralized water at 60°C and add the bag with the dye. • Heat solution to 93 °C and dip lens in using lens holder Ref. 06525. • Different hues can be obtained by varying the dipping times. The sachet protects the tint powders indefinitely. Check the UV transmission with our UV & Visible Spectrotester Ref. 05053. Printed colours may vary from actual lens tint. FC2 FC3 FC4 FC2 FC3 FC4 FC2 FC2 FC1 FC1 FC1 FC2 FC1 FC0

Molecular catalytic dyes™ for CR39 - 88 ml 32 BPI LIQUID DYES FOR LENSES 5.7 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX SWISS CHOCOLATE Ref. 06861 BROWN C Ref. 06864 BLACK Ref. 06870 | Ref. 06871 1 Liter Bottle SUN GREY Ref. 06872 25%  1’ 50%  3÷5’ 75%  7÷10’ 90%  12÷20’ BROWN ZS Ref. 06863 NOT SUITABLE FOR DRIVING. SIGNAL LIGHT COLOURS ARE NOT ALWAYS DISTINGUISHABLE. The dye molecules bond to the chemical structure of the lens and become part of it. Colours are more stable and the colouring time is faster. Mix 88 ml of dye with 1 litre of distilled water. Printed colours may vary from actual lens tint. FC1 FC2 FC3 FC4 FC1 FC2 FC3 FC4 FC1 FC2 FC3 FC1 FC2 FC3 FC4 FC1 FC2 FC3

Molecular catalytic dyes™ per CR39 - 88 ml 33 BPI LIQUID DYES FOR LENSES 5.7 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES GREEN/GREY Ref. 06883 GREEN Ref. 06880 BLUE Ref. 06885 YELLOW Ref. 06898 SUITABLE FOR NIGHT DRIVING RED Ref. 06890 75%  7÷10’ 90%  12÷20’ 50%  3÷5’ Base | Ø 76 mm | UV360 | Cat. 0 12 pcs. B 8 Base | Ø 73 mm | UV360 | Cat. 0 12 pcs. B 6 VIOLET Ref. 06892 Clear CR39 lenses for tinting INSTRUCTIONS FOR USE • Dissolve the contents of one bottle into 1 litre of distilled water at 60°C. • Heat solution to 93°C and dip lens in. • Different hues can be obtained by varying the dipping times. • Check the UV transmission with our UV & Visible Spectrotester Ref. 05053. Printed colours may vary from actual lens tint. FC2 FC0 FC2 FC0 FC2 FC3 FC4 FC2 FC3 Ref. 06660 1,8 mm Ref. 06665 2,2 mm Ref. 06664 2,9 mm Ref. 06668 1,8 mm Ref. 06675 2,2 mm

NEUTRALIZER SOLUTION Neutralizer solutions for CR39 34 5.7 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX Ref. 06850 Removes dye from organic lenses. Non flammable. 1 litre bottle of concentrated solution. INSTRUCTIONS • Dilute with distilled water, ratio 1:20. • Heat to 90°C. • Dip the lens until the required decolouring grade has been achieved. NEUTRALIZER SOLUTION FOR CR39

NEW CHEMICALS UV Diamond Dye 400 XL - Heating Fluid 35 5.7 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES Ref. 06851 Heating fluid to be used with plastic lens coloring equipments, formulated to maintain a high level of heat when coloring plastic lenses. High entropy. 1000 ml Bottle ready for use INSTRUCTIONS Make sure that the strength of the machine has been properly cleaned and dried so that the GL 77 is not contaminated. Pour the GL-77 into the appliance to colour and fill it up to the middle, making sure to cover the resistance when all the tanks are in place. Check the level monthly and top up if necessary. If contaminated replace it completely. The equipment must be turned off and the resistance must cool down before adding GL-77. Do not mix GL-77 with water or other solutions. GL-77 is not toxic and is not flammable when used as directed. Do not exceed 300°F. HEATING FLUID Ref. 06945 • Absorbs up to 99% of UV light under 400 nm. • Increases scratch resistance. Lens will not turn yellow and no oven required. Bottle 450 ml INSTRUCTIONS UV treatment must be applied before tinting. • Mix equal parts with distilled water. • Heat to 92°C-95°C in a clean container • Clean the lens before treatment. • Using a clean lens holder, immerse the lens for 10-15 min. Immersion time varies according to the thickness of the lens. UV DIAMOND DYE 400 XL

36 SOLDERING WIRE AND CONSUMABLES 5.8 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX SOLDER RODS Solder and flux combined for ready use. Ideal for nickel-silver, monel and stainless steel metal. CADMIUM FREE SOLDER WIRE All-purpose soldering wire in silver alloy (40%). Easy flowing, suitable for nickel silver and monel metal. Melting range: 610°C - 650°C. To be used together with borax flux (Ref. 06208). BORAX Promotes quick and easy flow of solder between the surfaces being soldered. Melting range: 500°C - 700°C. SOLDERING CONSUMABLES ISOFLAM Ref. 06221 Heat shielding paste. It will protect the non-soldered area by dissipating heat for temperatures up to 3,000°C (5,432°F). It isolates parts close to the soldering point and reduces the risk of damage to plastic and painted parts. It does not stain and washes off in water. 50 g Ref. 06210 Soft yellow solder. Melting range: 655°C - 680°C Pack of 10 rods - 250 mm each Ø 1,15 mm Ref. 06214 Yellow gold solder. Melting range: 605°C- 635°C Pack of 10 rods - 250 mm each Ø 1,15 mm Ref. 06202 Solder wire Ø 0.3 mm. Length: 2.5 m. Ref. 06208 Borax flux powder to be mixed with hot distilled water to make a paste. 100 g Ref. 06200 Solder wire Ø 0.5 mm. Length: 2.5 m. Silver alloy Flux

37 SOLDERING AND PLATING CONSUMABLES 5.8 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES GAS FOR MINIFLAM Ref. 06108 Butane gas. 400 ml bottle. CONSUMABLES FOR MINIFLAM CONSUMABLES FOR SOLDERING UNITS Ref. 06020 Caustic solution Electrolyte 0.5 litre - 2 pcs. Ref. 06022 Boric acid solution - flux 0.5 litre FOR AIRFREIGHT DELIVERIES Ref. 06055 Boric acid in grains 25 g PLATING SOLUTIONS Ref. 06411 Gold plating solution 50 ml Ref. 06415 Palladium plating solution 50 ml Ref. 06423 • Clamp electrode • Brush electrode

38 SOLDERING STEPS 5.8 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS LAB CONSUMABLES TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX PREPARATION • Always wear safety glasses. • First, remove any parts that will be affected by heat, e.g. pads, rim cover, temple tips. • Before heating, it may be necessary to apply a large amount of protective heat shield paste ISOFLAM (Ref. 06221) over those parts that are close to the area being heated. • Next, remove broken part by heating the area until it becomes detached. Use tweezers Ref. 03730 to help. POLISHING • Always prepare the surfaces to be soldered first by using the rubber abrasion wheels (Ref. 02444 - Ref. 02447). A clean, smooth surface ensures a good result. • Alternatively use a file. PROTECTION OF THE PARTS CLOSE TO THE SOLDERING POINT • Apply ISOFLAM protection paste (Ref. 06221) around the soldering point and on any components (nose pads, enamelled parts, etc.). • After soldering, the paste can be recovered and reused by adding a few drops of distilled water. POSITIONING OF THE FRAME • Place the frame on the soldering table (Ref. 06195) to give easy access to the part being soldered. The clamps should be kept away from the soldering area to avoid overheating. • Rest your elbows to support the hands. • The parts to be soldered should not be close to the table top. PLANNING THE SOLDER • If you are not using SOLDER rods (Ref. 06210-6214), prepare the solder wire (Ref. 06200-06202) in advance by wetting it and dipping it in borax flux powder (Ref. 06208). • Always heat first the thicker surface as it reaches the melting point in longer time by absorbing more heat. • Dip the soldered part in water. • Use protective goggles during all soldering steps.

Use of the different solder alloys 39 SOLDERING STEPS 5.8 ALL RIGHTS RESERVED © LAB MOD SYSTEM FRAME PARTS TOOLS PLIERS EQUIPMENTS LENSES REFRACTION & ORTHOPTIC INDEX LAB CONSUMABLES FRONT HINGE PLATE The part connecting the temple hinge to the eye wire rim is subject to great stress. Having a large supporting surface it is recommended to use the solder rods Ref. 06210 - Ref. 06214, or the 0.5 mm solder wire Ref. 06200. RIM CLOSING BLOCK When soldering the closing block to the rim, as the surface area is quite small, it is recommended that a small amount of solder is carefully placed. Recommend 0.3 mm wire Ref. 06202. HINGES Part of the frame that allows the temple to pivot. Recommended to use the solder rods Ref. 06210 and Ref. 06214, or the 0.5 mm solder wire Ref. 06200. After de-scaling remove and smooth residues of solder with rubber abrasion wheels (Ref. 02444 -Ref. 02447). Alternatively, use the brass (Ref. 02421) or steel brushes (Ref. 02422). Next polish with silicone wheels (Ref. 02442) or hard felt brushes (Ref. 02429). For best results clean the frame with an ultrasonic cleaner using concentrated detergent for ultrasonic cleaners, not to damage the frames and any type of lenses. High cleaning capacity enhanced by the mechanical action of the ultrasonic cleaner. TOUCH-UP BRUSH KIT Ref. 07100 - 07104 - 07106 - 07109 - 07110 - 07111 - 07112 - 07116 - 07117 - 07120 - 07121. Ref. 07118 Set of 12 lacquers. (Ref. 07100 Shiny Black - 2 pcs.) To touch-up soldered parts use these coloured lacquers. Ideal for individualising or personalising frame parts. POLISHING FINISHING ACTIVE LIQUID WITH ANTIBACTERIAL PROPERTIES Thanks to its active enzymes, this detergent can also be used without ultrasonic cleaner, just with lukewarm water. Its antibacterial properties sanitize the spectacles. Ref. 06859 1litre bottle Add one/two cupfuls of detergent to 1 litre of water. 100% NO ALCOHOL CLEANING

RkJQdWJsaXNoZXIy MjczNTY0